Home

Boom lift pre operation checklist

Boom Supported Elevating Work Platform Pre-use Inspection Checklist Operator: Make & Model: Company: Hour Meter Reading: Location: Date: MM/DD/YYYY Unit No.: POWER OFF CHECKS Status OK NO N/A POWER ON CHECKS Status OK NO N/A 1) Wheels and Tires M M M 21) Unit starts and runs properly M M Scissor Lift Pre-Operation Checklist Parts 1, 2, and 3 shall be completed by the first person who uses the lift for each work shift. If any defects are found, remove the key, tag the lift out of service and contact your supervisor. Please keep completed forms on file in the affected department for 3 years + the current year AERIAL LIFT PRE-USE INSPECTION CHECKLIST Both upper and lower controls are adequately protected from inadvertent operation : 7 : If the Aerial Lift fails any part of this inspection, remove the key and report the problem to your supervisor. DO NOT operate. Submit completed checklist to your supervisor AERIAL LIFT PRE- USE INSPECTION CHECKLIST 5 Both upper and lower controls are adequately protected from inadvertent operation. IF THE AERIAL LIFT FAILS ANY PART OF THIS INSPECTION, REMOVE THE KEY AND REPORT THE PROBLEM TO YOUR SUPERVISOR. DO NOT ATTEMPT TO MAKE REPAIRS UNLESS YOU ARE A TRAINED AND AUTHORIZED SERVICE PERSON ALL aerial-type lifts must be inspected prior to use. All items on this checklist must be verified as true before using the lift. NOTE: A designated person (spotter) must be on the ground to guide the lift operator whenever working around energized lines and/or equipment. Visual and Operational Inspection Points 1

Forklift Inspections & Pre-Operation Checklist Daily

Certified Aerial Lift Operator: Complete this form, before each use. Check OK if the items are in good condition/operation or check the Repair Required if the item is not in proper order. IMPORTANT: The aerial lift must not be utilized if there are any items that require repairs. Have a service company repair prior to use Pre-Use Inspection Checklist for Aerial Lifts Instructions: The operator shall inspect aerial lifts prior to placing the machine in service at the beginning of each work shift. Deficiencies noted on the inspection form shall be corrected prior to operation. If the deficiencies cannot be corrected, the aerial lift shall not be used and lock-out/tag Here is a standard manlift inspection Checklist Pre-shift Inspection (The Manlift operator must complete this form at the beginning of each shift) Date _____ Manlift # _____ Hour Meter _____ Inspection OK Not OK N/A Explanation Basic inspection (from ground)

Operation and Safety Manual Original Instructions - Keep this manual with the machine at all times. Boom Lift Models E400A E400A Narrow E400AJP E400AJP Narrow M400A M400A Narrow M400AJP M400AJP Narrow 3121215 January 7, 201 If scissor lift is found to fail any aspect of the inspection, remove from service and report it to your supervisor. AERIAL LIFT PRE-USE INSPECTION CHECKLIST Operator: Date: Unit Type: Lift ID #: Location: # Inspection Item/Description Pass/Fail/NA 1 Perform a visual inspection of all aerial lift components, missing parts, torn o Telehandler Forklift Pre-use Inspection Checklist Operator: Make & Model: Company: Hour Meter Reading: Location: Date: MM/DD/YYYY Unit No.: POWER OFF CHECKS Status OK NO N/A POWER ON CHECKS Status OK NO N/A 1) Wheels and Tires M M M 20) Unit starts and runs properly M M

Genie Safety Minute: Pre-Operation Inspectio

Crane log book, start of shift crane inspection completed & signed? Checklist style? OHS 14.14(a) OHS 4.9(2)(b) Crane load chart is available for the boom, counterweight and outrigger/stabilizer position that the unit is set-up in? OHS 4.8 OHS 4.9 Crane set-up beside an excavation or on a concrete slab needs engineering? OHS 14.69(2 If scissor lift is found to fail any aspect of the inspection, remove from service and report it to your supervisor. SCISSOR LIFT PRE-USE INSPECTION CHECKLIST Operator: Date: Unit Type: Lift ID #: Location: # Inspection Item/Description Pass/Fail/NA 1 Operating and emergency controls are in proper working conditio

Aerial Lift Pre-Inspection Environmental Health & Safety Checklist Page 1 of 2 Origin Date: 2010 Revision 3 Revision Date: 11/7/2017 KEEP THIS FORM WITH THE LIFT WHEN IN USE/RETURN TO ROZELL WHEN FINISHED AERIAL LIFT PRE- USE INSPECTION CHECKLIST Operator(s) Print Name Contact # EWU Aerial or Scissor Lift ID Forklift Inspections & Pre-Operation Checklist Forklifts are a common sight in many industries . Whether used in warehouses , manufacturing plants , retail applications or elsewhere, forklifts are crucial tools in the daily operations and supply chains of most businesses Aerial Lifts. Xtra Capacity; Electric Lifts; Telescopic Boom Lifts; Articulated Boom Lifts; Boom & Scissor Accessories; Trailer Mounted Boom Lifts; Pre-Operation Inspection. by Genie On Nov 15, 2017, 03:00 AM . Subscribe To Aerial Pros. Filter by tags. AWP Safety; Genie Safety Minute; Jobsite Safety. A walkaround inspection ensures there is no visible damage to your boom lift prior to operation. We recommend performing this inspection before you use your boom lift each day and any time you change operators. Watch the video to learn the proper steps to follow, including checking fuel levels, ensuring parts are in place and noting visible.

Before starting a job, use an aerial lift safety checklist for fall protection gear that ensures: All workers have the proper gear. Workers have body harnesses or restraining belts and lanyards. These are attached to a point on the boom or bucket. These are not belted off to nearby structures or poles The below post was published by our friends at Aerial Lift Certification.The article contains two excellent checklists; The Fool-Proof Pre-Start Inspection Guide for Aerial Lifts and 8 Things NOT to do When Operating an Aerial Lift (and 8 Things You Should Do Instead). Regarding the latter, in What to do When Operating an Aerial Lift list, it directs to set the outrigger foot. Pre‐Operation Procedures Pass Fail N/A Operator's manual is legible and in storage container on the platform Safety decals are legible and in place Batteries in good condition and at proper fluid level No signs of hydraulic oil leaks and oil at proper level (add oil if needed) GENIE LIFT INSPECTION CHECKLIST

Retraining Workersshouldberetrainedifanyofthefollowing conditionsoccur: • Anaccidentoccursduringaerialliftuse, • Workplacehazardsinvolvinganaerialliftare. Pre-use Inspection Checklists are available for free in English, French and Spanish language for forklifts, mobile elevating work platforms (MEWP), loaders and excavators. The following checklists are provided for general use only and should be supplemented with good judgment and the recommendations of the manufacturer Genie Inspection Forms. Return to Genie ® Service Index; Pre-Delivery Preparation Report; Maintenance Inspection Form - Booms; Maintenance Inspection Form - Scissor How to Inspect Your Aerial Lift Before Operation. Working on aerial lifts involves many hazards - enough to cause about 26 worker deaths each year. Some of the leading causes of these deaths are tipovers, electric shock, and being crushed. One common thread that runs through all of them is a lack of proper safety training

How to Perform a Boom Lift Walkaround Inspection JL

  1. Depending on the type of forklift you are using, there may be other propulsion-specific aspects to check: Electric Forklifts Pre-operation Checklist. Here are a few items worth checking on your electric forklifts: There is no fraying or exposed wires in cables or connectors; Battery restraints are functional; Electrolyte levels are prope
  2. • Prior to the operation of any aerial lift a PreUse Inspection Checklist must be completed. - This applies at the beginning of every work period, and whenever a new equipment operator takes control of the AL. Aerial lifts shall not be operated from trucks, scaffolds, or similar equipment. General safe work practice
  3. - Complete the Daily Pre-Use Inspection Checklist before operating any aerial lift. - At least annually review the procedures outlined in Section 6.0 of this document. - Observe the operation of the aerial lift, and report unsafe practices to your supervisor
  4. ate such hazards before and during operation of an aerial lift. Items to look for include: • Drop-offs, holes, or unstable surfaces such as.
  5. g the inspection: _____ Date: _____ Number Inspection Area OK FAIL Comments 1 Ensure proper operation of engine and lifting devices. Verify no indication of vibration, etc. 2 Check for proper fluid levels: fuel, oil
  6. Forklift Inspections & Pre-Operation Checklist Forklifts are a common sight in many industries . Whether used in warehouses , manufacturing plants , retail applications or elsewhere, forklifts are crucial tools in the daily operations and supply chains of most businesses
  7. 9.19.16 Pre-Operation Aerial Lift Inspection Checklist (Filled out by Person Operating Machine) Equipment Type: _____ (Forklift, Sky Lift, Boom Lift, Scissor Lift

The Comprehensive Aerial Lift Safety Checklis

Check Operation of Lower and Upper Controls Scissor Action - Lifts Smooth without Binding Boom Action - Lifts, Extends/Retracts, and Pivots without Binding Body Harness, Lanyard, Anchor Points, Safety Gate and Guardrail Condition Manufacturers Nameplate, All Placards, Warnings, Control Markings Legible Operators Manual and Manual o Brakes/boom/load/ rotate Fire extinguisher Crane stability Comments: No load test Fleeting sheeve Limit switches Operator's signature: Supervisor's signature: This checklist is based on EM 385-1-1, dated 3 September 1996. Use of this checklist is optional

Aerial Lift Safety Checklist Manlift Inspection

  1. g a bucket truck pre-operations check. The ANSI aerial platform standards group understands that there are bucket trucks on the road from all eras and for.
  2. an unsafe for operation PASS FAIL 5 Check boom horizontal limit switch for proper operation and security, both visually and manually, Switch must shut down high engine and high drive speed when boom is raised above horizontal PASS FAIL I certify all above items have been verified and validated as Pass or Fail. Any items marked a
  3. Attachment 4 - Articulating Boom Lift Pre-operation Inspection..23 Attachment 5 - Elevating Attachment 10 - Vehicle Mounted Lift Pre-operation Inspection..35 Attachment 11 - FAQ/Fact Sheet.
  4. 10. Employees using aerial lifts shall be instructed on how to recognize and avoid unsafe condi-tions and hazards. 11. Ground controls shall not be operated unless permission has been obtained from personnel in the platform, except in case of an emer-gency. 12. Regular inspection of the job site and aerial lift shall be performed by competent.
  5. with the specific lift to be operated. Operator Evaluation OK Not OK Beginning Lift Operation Completes Operator's Daily Checklist, before operating the lift truck. Personal Fall Arrest system is secured before operating lift. Operator is wearing the appropriate safety equipment. Checks that batteries are fully charged or that the fuel tank.
  6. 9 Fully retract and lower boom before raising outriggers for transport on the jobsite or reconnecting to vehicle. Trailer / Transporting 1 Secure the operator platform to the boom lift using the transportation safety latch. 2 Tra nsport m ach i ew t oper to r pltfo m u d . he lift arms should be down, secured in place and outriggers fully raised

Pre-use Inspection Checklists · IVES Training Grou

MEWP Pre-Use Inspection Checklist. Added 1 Jan 2018. Last updated 1 Jan 2018. International Powered Access Federation is a registered society under the UK's Co Operative and Community Benefit Societies Act 2014 (Registration number 30998R), whose registered office is at Moss End Business Village, Crooklands, LA7 7NU, UK Check out this boom lift checklist for making the right Boom Lift Rental or purchase decision and maintain the quality of work performed along with the safety of operators. #1. Consider the Size and Horizontal Reach. As we mentioned, the height you need the platform to reach is the first thing that comes to mind for boom lift selection

Pin on Crane & Rigging Tools & Useful Things

An elevating work platform (EWP) is a device used to support a platform on which personnel, equipment and materials can be elevated to perform work. It's important to remember that working at heights can come with great risks, but by performing some pre-operational checks along with routine and annual inspections, the risks to the health [ checklist to be completed. The procedure number or checklist to be completing the Pre-operation Inspection, the Maintenance items and the Function Tests. Boom(s) and Platform Inspect and Adjust Boom Cables - All Models (for first 12 months of ownership) Q-3 OSHA wishes to acknowledge that this checklist and related graphics was developed in cooperation with the Industrial Truck Association as part of the OSHA-ITA Alliance. The OSHA standard for powered industrial truck training [ 29 CFR 1910.178(l) ] requires that an employer provide training to truck operators on a variety of topics CONCRETE BOOM PUMP TRUCK PRE-ACCEPTANCE CHECKLIST. 0. 0. 0. Revision No: 1. Document Number: JH-FRM-PAE-001-28. Page 2 of 2. When printed this document is an uncontrolled version and must be checked against the IMS electronic version for validit

JOB HAZARDS CHECKLIST/CREW REVIEW Crane will be operated in accordance with OEM recommendations Local weather status verified. Safe for duration of lift. Current wind speed (_____ mph) Wind speed required to defer lift (_____ mph) Swing radius barricade erected with note tag Crane grounding required Working in vicinity of power lines Pre-Use Inspection Checklist . Operators, who must be trained and authorized, must complete this checklist prior to operating any MEWP or vehicle-mounted aerial lift. Return this completed checklist to your supervisor. Caution: This checklist may not feature all items on your equipment The walk around inspection ensures there is no visible damage to your boom lift. A pre-operational check of your machine must be conducted before using it ea..

Genie Inspection Forms - Parts, Service and Operations Manual

Using an aerial lift inspection checklist based off of OSHA's Aerial Lifts Standard is the easiest way to comply with the regulation. It will not only help ensure worker safety, but also help you avoid any fines for violating safety regulations in the event of an OSHA inspection. Aerial Lift Pre-Use Inspection Aerial Lift / Bucket Truck Page 4 of 9 2. No modifications or additions that affect the capacity or safe operation of the equipment may be made without the manufacturer's written approval. 3. If such modifications or changes are approved by the manufacturer and made, the capacity, operation, and maintenance instruction plates, tags, or decal Before using your equipment, OSHA suggests you follow its aerial lift pre-use inspection checklist. By performing pre-start inspections, it can help you catch potential dangers and allow a professional to fix any mishaps before a significant malfunction occurs

Scissor Lift Safety Pre-Operation Safety Checklist This sample checklist has been developed by the Indiana Department of Labor's INSafe OSHA consultation division to assist employers in the suc-cessful development and implementation of an effective occupational safety and health management system Before using an aerial lift, you must do a complete pre-operation check. Follow the checklist on the lift's clipboard. Lift Inspection. The first part of a pre-operation check is to inspect the lift. Use the checklist and the operator's manual to inspect each part of the lift for proper function • Every aerial/scissor lift must undergo a pre- use inspection prior to use on each shift. Aerial/scissor lifts not used during a shift do not have to undergo an inspection during that shift. • Pre-use inspections must be documented using anappropriate checklist for the aerial/scissor lift similar to the one in Appendix B. Refer to th

How to Inspect Your Aerial Lift Before Operation - AL

  1. When operating heavy equipment, including boom and scissor lifts, a pre-shift or pre-trip inspection is critical. These inspections include a visual check for a range of problems, including low fluid levels, tire cuts, loose or missing parts, cracked welds, hydraulic leaks, and fuel leaks
  2. A great way to start incorporating safety into your workday is to go through an aerial safety checklist. Creating a safety process will get you and your team in the habit of checking for any red flags before and during lift operation. We put together a list of 14 safety tips that your team should follow when operating aerial lifts
  3. a scissor lift (e.g., contact with electrical wires). o Reporting any equipment defects or maintenance needs. Inspections: • See attached Pre-operation checklist. • Pre-Use: Before use each day or at the beginning of each shift, the scissor lift shall be given a visual inspection and functional test by the operator
  4. Aerial lift safety is of paramount importance to Genie. Check our Safety Bulletin Tool for important information on your articulated boom lift, telescopic boom lift, scissor lift or telehandler
  5. Bucket van - under 10,000 GVWR Bucket truck - 10,001+ Digger derrick with platform/basket - 26,001+ (material handling) Plant placer equipment with aeria
  6. When using a scissor lift consider one with a moveable or remote control box. Before use and at the start of each shift a MEWP must be checked by the operator and tested in accordance with the pre-operational checklist based on Australian Standards. and report it has failed pre‑operation inspection. Shutdown and post-use inspection.
Scissor Lift: Scissor Lift Daily Checklist

Forklift Inspections and Pre-Operation Checklists - WD

Daily Bucket Truck Pre-Operations Check page

  1. Sunbelt Rentals offers heavy equipment operator training for operators of our equipment, including boom lifts, scissor lifts, all kinds of forklifts, and earth moving equipment. In addition, Supported and Suspended Scaffolding User and Competent Person training and Train the Trainer courses are also available and suited for your safe operation.
  2. each shift. Aerial/scissor lifts not used during a shift do not have to undergo an inspection during that shift Pre-use inspections must be documented using an appropriate checklist for the aerial/scissor lift similar to the one in Appendix B. Refer to the manufacturer's inspection requirements for complete inspection details
  3. You should use the pre-operation checklist for scissor lift . PRE-Operation: 1-Ensure operator is licensed to Do High-Risk Work - Working at Heights. 2-Perform Pre Start Check of all components and platform. 3-Report any faults to your supervisor
  4. (2) A boom hoist disconnect, shutoff or hydraulic relief must be provided on a crane or hoist to automatically stop the boom hoist when the boom reaches the maximum boom operating angle specified by the manufacturer and before the boom stops are contacted. (3) A jib on a crane or hoist must be restrained from backward overturning. 14.24 Molten.
  5. Before putting a bucket truck to work, a thorough visual inspection should be performed each and every day. Following a checklist, look for dents, cracks, breaks, leaks and damages in key areas that can possibly compromise the worthiness of the truck. For example, check tire inflation levels. Ensure there are no rips, bulges, or weakening treads
  6. Every aerial/scissor lift must undergo a pre-use inspection prior to use on each shift. Aerial/scissor lifts not used during a shift do not have to undergo an inspection during that shift Pre-use inspections must be documented using an appropriate checklist for the aerial/scissor lift similar to the one in Appendix B. Refer to th

Page 1 of 3 AWP Jobsite Checklist To avoid over reaching or climbing on guardrails and to avoid out of level shutdown of the lift a pre- Keep your work area free from debris that could cause tip over or interfere with smooth operation of the lift or cause tire damage. Bumps or floor obstruction A pre-use check or pre-operational inspection is done to ensure that there is no visible damage to the scissor lift before use. This is done through a walk around inspection format. The areas and items to inspect will depend on the manufacturer's operation and manual which is why it is important for workers to always refer to it OSHA states that scissor lift accidents are primarily caused by a lack of fall protection, stabilization, and positioning. To prevent these accidents, proper safety training should be implemented. Pre-operation checks, following manufacturer's instructions, and using the proper safety equipment are a few of the measures that should be taken. machine operation contained in this operator's manual. 1 Avoid hazardous situations. Know and understand the safety rules before going on to the next section. 2 Always perform a pre-operation inspection. 3 Always perform function tests prior to use. 4 Inspect the workplace. 5 Only use the machine as it was intended

-OSHA requires the other end to be attached to the boom or basket; belting off to an adjacent pole, structure, or equipment is prohibited -ANSI recommends that the lanyard be connected to the aerial device at the platform position. Fall-arrest equipment inspection -Fall-arrest equipment must be thoroughly inspected before each use the lift function is restored. Functional Checks (See Manual for details) Pot-Hole Protection (if applicable) If the lift is configured with pot-hole protectors, inspect that components are secured, raise lift from ground controls to ensure they are fully engaged Sign Off If unit is operational, initial and date; Pre-Use Inspectio Health, Safety and Environmental Procedure 304_2 - Daily Aerial Lift Pre-Operation Checklist To be completed in full by an aerial lift certified operator each day before using the equipment. This document, once completed, is to be forwarded to the Maintenance Department for recordkeeping. Date Operator Hours Unit Manufacturer Model Serial CRANE OPERATION PRE-LIFT CHECKLIST EHSDP0120.9 Rev: 0 This checklist must be reviewed by both the crane operator and the Kidde contractor coordinator prior to performing a crane lift. All questions must be considered. Any items that are determined, and agreed to be no

Forklift Pre-Start Checklist Book (52 Pages) – A Must For

Aerial Lift Pre-Operation Checklist Date: Operator: Hours: Residential Unit: # 1 Manufacturer: Model: Serial # Jobsite: Morgan's Point Project Bermuda Supervisor: Check the appropriate box S=Satisfactory U=Unsatisfactory NA=Not Applicable CONDITION S U NA Comments SITE INSPECTION 1 Ground Area - Clear path 2 Audibility 3 Traffic Contro forklift checklist to take account of the type and level of use. Where forklifts are shared by more than one driver responsibility for conducting checks should be clearly assigned. As a forklift operator, by law, you must make sure that the forklift you drive is maintained and used so that it is unlikely to cause a danger to anyone. If specifi Forklift Pre-Shift Inspection Guides and Checklist Download As required by OSHA, every forklift must be inspected before the operation. This is not only a good idea to maintain compliance with OSHA; it is a best practice for any forklift fleet - Scissor Lifts - Aerial ladders - Vertical towers - Articulating boom lift - Extensible (telescoping) boom platform On the reverse side of each lift Pre-Operation Inspection Form (Attachments 3 and 4) is a written checklist for Site Evaluation that may be used to document the Operator's assessment of their work environment.

MEWP Pre-Use Inspection Checklist IPA

BOOM LIFT CYLINDER Check the boom lift cylinders for hydraulic leaks and other damage. cylinders for hydraulic PLATFORM HINGES Check hinge for smooth operation. Check hoses for chaffing and other damage. Check hinge for PRE-OPERATION INSPECTIONPRE-OPERATION INSPECTIO Appendix A provides an example of an aerial lift pre-use inspection checklist. At a minimum, the inspection process should address the following areas: 4.2.2.1 Visual checks: 4.3.9 Surface slope should be taken into consideration when using an aerial lift and operation should only occur on smooth level surfaces or within the slop Checklist - planning the safe set-up and operation of elevating work platforms (EWPs) Subject: Elevating work platforms checklist Keywords: PN11974 earthmoving equipment checklist Last modified by: Alisha Perret

Daily mobile crane inspection checklist

Checklist - planning the safe set-up and operation of mobile cranes. A mobile crane is capable of travelling over a supporting surface relying only on gravity for stability. There are three general types: hydraulic boom cranes. lattice boom cranes including crawler cranes. non-slewing (pick-and-carry) cranes Minimum disturbance of aerial lift platform. Verify unit balance and stability. 8. Boom up & down, in & out. Fully extend, fully raise. Minimum disturbance of aerial platform. Verify unit balance and stability. 9. Rotate/swing boom 360 degrees in each direction. Minimum disturbance of aerial platform. Verify unit balance and stability. 10. Tilt.

submit completed checklist to your supervisor. DUR‐A‐LIFT INSPECTION CHECKLIST Inspected by: Date: Pre‐Operation Procedures Parking Workplace Inspection ‐ Survey work area for potential hazardous operating conditions prior to lift usage. Ensure hazards identified are addressed Aerial Lift panel ☐ Outriggers ☐ Boom pivot shaft ☐ Axle locks ☐ Safety limits Lift capacity is _____lbs. ☐ ☐Buggy whip/lights ☐ Site training class ☐ Windshield (if not PPE required) Specific Vehicle Inspection Checklist Notes: Signature: 20202-07-2 Haskell Training Manual Revised 4-4-2018 Scissor Lift Performance Evaluation 1 SCISSORLIFT PERFORMANCE EVALUATION Does a pre-start check, including tires, lubrication, hydraulic Corporation certifies this individual as being competent in the operation of this device. I certify that this individual has passed the performance evaluation Articulating Boom Lift Pre-Operation Inspection. Confined Space Permit. Electrical Cord Inspection Checklist. Elevating Work Platform Pre-Operation Inspection. Extensible Boom Platform Pre-Operation Inspection. Fall Protection Safety Program Hazard Report. Hot Work Permit Request Form. Injury & Illness Prevention Plan (IIPP) request. Incident. 9. Boom up, down, in and out (Fully extend lift while maintain safe control of operation.) 10. Turn lift 360 degrees right and left. 11. Maneuvered the lift if equipped with proper wheel drive train. 12. Turn off lift using the emergency stop function. 13. Lowered the basket before attempting to move the lift. 14

Search Results for “Daily Forklift Inspection ChecklistPre-Operational Checklist - Lattice Boom – Crane InstituteAerial Lift Inspection Form - Fill Online, PrintableAerial Work Platform / Lift + Checklist Caddy #SCADD(AScissor Lift Pre-Shift Inspection

machine operation contained in this operator's manual. 1 Avoid hazardous situations. Know and understand the safety rules before going on to the next section. 2 Always perform a pre-operation inspection. 3 Always perform the function tests prior to use. 4 Inspect the workplace. 5 Only use the machine as it was intended. You read, understand and. Designated Lift Supervisor Crane Operator Designated Rigger SAFETY REVIEW CRANE If the answer to any of the following questions is NO, lifting operations shall not proceed. Yes No NA 1. Was a pre-lift operations meeting held? 2. Is the yearly crane/hoist inspection current? (Is it documented?) 3. Has the daily visual inspection been. Forklift Daily Checklist. A forklift daily checklist is used prior to the daily operation of a forklift to ensure that it is in good working condition. This forklift daily inspection checklist is divided into two parts: (1) before starting the engine and (2) after starting the engine • Complete the Daily Pre-Use Inspection Checklist before operating any aerial lift. • At least annually review the procedures outlined in Section 6.0 of this document. • Observe the operation of the aerial lift , and report unsafe practices to your supervisor. 6.4 Occupational Health and Safety Coordinato